Portable Moka Pot French Press Coffee Maker Multifunctional Electric Turkish Espresso Aluminum Mocha Pot Pitcher

Product parameters

Name: hand flushed coffee Mocha pot
Craft: semi Handmade
Size, as shown in the picture
Material: food grade aluminum alloy
Electric furnace: stainless steel + heat-resistant plastic
Electric furnace power: 500W

common problem

What about oxidation spots during the use of mocha pot?
1. The traditional Mocha pot is made of aluminum alloy. It is difficult to produce oxidation spots during use
No, in addition, coffee contains acidic substances, which may change color when exposed to aluminum
Therefore, timely cleaning and drying are very important;
2. Don’t worry if there are oxidation spots. The oxidation of materials is harmless to human body;
3. Try to use citric acid or vinegar for cleaning (oxidation spots are difficult to remove, and the effect is not guaranteed)
How to clean after use?
Wash with warm water after each use. Do not use steel ball or frosted material for cleaning. Detergent is not allowed
There can be strong alkali. The rubber ring and filter gasket at the bottom of the upper pot also need to be disassembled and cleaned, and the gap of the rubber ring is accumulated
Leaving coffee grounds is easy to mildew. After flushing, place the upper pot, funnel and lower pot separately for ventilation and air drying
Dry, reassemble after next use (do not install directly, airtight, easy to produce taste and oxidation)
How to maintain it if not used for a long time?
The rubber ring on the pot is recommended to be checked and replaced regularly to prevent aging from affecting the taste and extraction effect
If you don’t use the mocha pot for a long time, you can store it in a carton or a dry and ventilated place.
Precautions for use:
1. Do not use the lower pot alone for heating. Do not open the lid to check during cooking. Hot water is easy to use
Scald caused by splashing;
2. The handle will melt due to too high temperature. If gas fire is used, it is recommended not to exceed the diameter of the kettle bottom;
3. Do not add more water than the safety valve. When the water is poured, the gas will be ejected from the safety valve
The valve will lose its protection.